Tyrata’s IntelliTread Now Detects Real-Time Uneven Tread Wear - Maintenance

Tyrata’s IntelliTread Now Detects Actual-Time Uneven Tread Put on – Upkeep

Tire profile on Tyrata.io that detects uneven put on.

Photograph: Tyrata/Work Truck

Tyrata, tire sensor and information administration firm, launched its Tyrata.io system in 2021. It’s a complete information portal for its IntelliTread tire tread monitoring merchandise.

Now it has launched a brand new function to its IntelliTread Drive-Over System (DOS) and Tyrata.io platform — uneven tread put on detection and tire mismatch functionality.

This important, new function creates digital tire profiles of each tire within the fleet and mechanically alerts fleet managers when tires put on erratically – which is an indication of misalignment or different mechanical issues.

The system can even alert customers when tires inside a twin or axle pair start sporting at totally different charges, which is named a mismatch. With the addition of uneven put on and mismatch info, fleets could make knowledgeable tire rotation choices to increase the lifetime of their tires and protect tire casings for retreading.

Detect Uneven Tread Put on with IntelliTread DOS

Uneven put on is likely one of the most essential indicators of rising mechanical and security issues in a car. Sadly, with guide inspection, uneven put on on tires is usually seen a lot too late resulting in elevated tire prices, important restore prices and critical security violations that may result in accidents.

Consequently, early identification of uneven or mismatched put on in tires is probably among the best and least expensive strategies for a fleet to handle price, cut back down-time and keep away from CSA (compliance, security, accountability) violations. 

Traditionally, detecting uneven tread put on and figuring out downside tires requires a time-consuming guide inspection of each tire on the car. As well as, the tread profile of internal tires on tandem axles are significantly troublesome to measure as a result of their location, so irregular tread put on patterns of those tires are oftentimes missed in time for corrective motion.

The Tyrata IntelliTread Drive-Over System is a tire tread monitoring system that mechanically measures tire tread depth and tire put on patterns each time a car passes via a service lane or fleet depot.

When a car drives over the pace bump-like system, the DOS system takes tread depth measurements throughout your entire width of the tire. The system then uploads the information to the Tyrata.io cloud-based portal in actual time the place it creates a digital profile of each tire on the car for evaluation and viewing utilizing a cellular system or pc monitor.

Routinely Monitor Tires with Tyrata.io

Over the life of every tire, Tyrata compiles a whole lot of profile measurements and mechanically displays modifications within the tire profiles. Tyrata.io will proactively alert customers when tires are sporting erratically and gives actionable insights to assist the operator resolve the problems.

“Early detection of uneven put on in a tire is a recreation changer in fleet tire administration,” mentioned Tyrata VP of Engineering Dave Koester. “In our pilot trials with this new function, we now have demonstrated the flexibility to save lots of tires and their casings, determine wheels that want alignment and even pinpoint critical mechanical compliance issues. This has very important implications on each price and security for the fleet.”

Starting in October 2022, clients of the Drive-Over System will see the uneven put on detection function of their Tyrata.io portal interface. Customers can set thresholds for what they think about to be uneven put on in a tire, in a twin set, and throughout an axle. No extra setup is required.

Initially posted on Work Truck On-line

Similar Posts

Leave a Reply

Your email address will not be published.